1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rusted OEM parts on 2019 4Runner or replacement parts?

Discussion in '5th Gen 4Runners (2010-2024)' started by BeachgirlTX, Aug 29, 2023.

  1. Sep 2, 2023 at 8:30 AM
    #31
    BeachgirlTX

    BeachgirlTX [OP] New Member

    Joined:
    Aug 29, 2023
    Member:
    #35304
    Messages:
    24
    Gender:
    Female
    First Name:
    OEM Rusty Parts?
    Vehicle:
    2019 4Runner
    Dilluision I too noticed stickers with tape and new bolts holding up some of these rusty parts. Time for a legal auto inspector to provide feedback in real time.
     
  2. Sep 2, 2023 at 8:43 AM
    #32
    BeachgirlTX

    BeachgirlTX [OP] New Member

    Joined:
    Aug 29, 2023
    Member:
    #35304
    Messages:
    24
    Gender:
    Female
    First Name:
    OEM Rusty Parts?
    Vehicle:
    2019 4Runner
    I’m Back online and second pair of eyes on the ground from a legal professional auto inspector will be done.
     
    GtownRunner likes this.
  3. Sep 2, 2023 at 8:50 AM
    #33
    BeachgirlTX

    BeachgirlTX [OP] New Member

    Joined:
    Aug 29, 2023
    Member:
    #35304
    Messages:
    24
    Gender:
    Female
    First Name:
    OEM Rusty Parts?
    Vehicle:
    2019 4Runner
    No live close to the Gulf of Mexico
     
    Saker likes this.
  4. Sep 2, 2023 at 8:59 AM
    #34
    BeachgirlTX

    BeachgirlTX [OP] New Member

    Joined:
    Aug 29, 2023
    Member:
    #35304
    Messages:
    24
    Gender:
    Female
    First Name:
    OEM Rusty Parts?
    Vehicle:
    2019 4Runner
    Startrek a professional legal auto inspector will provide more than what you can see
    By a complete bumper to bumper total inspection. They can see new bolts holding rusted parts as well as
    taped on stickers and possibly more to go in a legal recourse.
     
  5. Sep 2, 2023 at 9:03 AM
    #35
    BeachgirlTX

    BeachgirlTX [OP] New Member

    Joined:
    Aug 29, 2023
    Member:
    #35304
    Messages:
    24
    Gender:
    Female
    First Name:
    OEM Rusty Parts?
    Vehicle:
    2019 4Runner
    Exactly my 4Runner is only 4 years old and I’ve never seen all this rust before.
    Inspectors who deal with litigation on behalf of consumers will be able to uncover what I see but cannot prove without legal inspection.
     
  6. Sep 2, 2023 at 11:14 AM
    #36
    JETSPD1477

    JETSPD1477 New

    Joined:
    Nov 30, 2022
    Member:
    #29859
    Messages:
    364
    SoCal
    Vehicle:
    Typical 4Runner
    the “new” bolts you see are made of a different material that doesn’t rust the same way but you can see corrosion on them and the exposed threads. there isn’t any tool marring on the bolts.

    the “tape” you see on the stickers is actually paint which are honor marks made at the factory as a part of quality control.
     
  7. Sep 2, 2023 at 11:25 AM
    #37
    Mojave

    Mojave New Member

    Joined:
    Jul 30, 2023
    Member:
    #34480
    Messages:
    62
    Gender:
    Male
    First Name:
    zeak
    az
    Vehicle:
    5Th Gen 4Runner trd off Road
    did you drive it in the gulf ? considering your trucks not that old, the rust may be superficial only. I would have it cleaned up, repainted and some type of undercoating. best of luck beachgirl.
     
    mrmike7189 likes this.
  8. Sep 2, 2023 at 1:16 PM
    #38
    Deuxdiesel

    Deuxdiesel New Member

    Joined:
    Mar 19, 2020
    Member:
    #13584
    Messages:
    453
    Gender:
    Male
    SE MI
    Vehicle:
    '18 SR5P
    Just spit-balling here, but is there a chance they gave you back the wrong truck? I love a good scam story. To be fair, my rust belt '18 doesn't have nearly that much surface rust, but it looks like just normal surface rust on yours.
     
    mrmike7189 likes this.
  9. Sep 3, 2023 at 6:27 PM
    #39
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,434
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    That’s what it seems to me as well.

    I think it doesn’t help in the “trust” department, for a shop to have the vehicle for so long to fix reportedly minor damage,
     
    mrmike7189 likes this.
  10. Sep 3, 2023 at 7:47 PM
    #40
    qcTRDct

    qcTRDct New Member

    Joined:
    Mar 9, 2022
    Member:
    #26029
    Messages:
    464
    Gender:
    Male
    Vehicle:
    2022 ORP KDSS
    :popcorn: I watching and typing using no punctuation just curious where this will go
     
  11. Sep 3, 2023 at 11:03 PM
    #41
    Trekker

    Trekker Regular Member

    Joined:
    Jul 25, 2020
    Member:
    #15732
    Messages:
    985
    Gender:
    Male
    Vehicle:
    1997 3rz 5spd
    Sounds like the Seattle Windshield Pitting Epidemic where people blamed windshield pitting on everything from nuclear fallout (wouldn't be the 50's without nuclear fallout) to mega radio towers, when in reality pitting was always present, people only started noticing it once they were told to look. You noticed the rust that was always there when something genuinely suspicious caught your attention (the remote).

    The ocean if fucking brutal, you don't even have to live next to the ocean, the strong breeze will atomize the salt water and carry it far. Metal is very susceptible, and your 4runner might not even have to roll onto the beach. I'd sanding and repainting the most important parts like the frame, or fluid filming over it if you don't want to do that. It's not ideal, but I'm not shocked.

    Your key being changed is suspicious. If they do something with the key, they have to tell the customer. I'd be a little upset if they tried pulling a fast one like that. But if the place has a good reputation, they'd be stupid to risk it swapping slightly more used 4runner parts onto your vehicle. The bolts are made of different metal and get a different treatment, it isn't done in one go, so different rust rates isn't unexplainable.

    If I were an unscrupulous shop, I'd skim Freon. Easy to access in vehicle, nothing to identifying about it, pressure gauges for freon are inaccurate or too expensive, and the next person who needs a recharge I can sell it to- no fences required.
     
    Last edited: Sep 3, 2023
    Technologic80 likes this.
  12. Sep 4, 2023 at 12:27 AM
    #42
    EC15

    EC15 ...

    Joined:
    May 10, 2022
    Member:
    #27013
    Messages:
    131
    Gender:
    Male
    Did you look at the VIN stamped into the frame behind the passenger front wheel?
    Like others said, looks like your rust. Bolts don' took touched.
     
    mrmike7189 and JETSPD1477 like this.
  13. Sep 5, 2023 at 10:37 AM
    #43
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,089
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    My Tundra has these said stickers also. Should I go get a legal auto inspector? LOL

    Please post report when you get it.
     
    Technologic80 likes this.
  14. Sep 5, 2023 at 12:56 PM
    #44
    Saker

    Saker New Member

    Joined:
    Apr 8, 2022
    Member:
    #26498
    Messages:
    384
    Gender:
    Male
    Vehicle:
    21 Black T4RORP
    Check the Vin and previous mileage ......... as others stated, maybe you have the wrong 4Runner.
     
  15. Sep 5, 2023 at 1:05 PM
    #45
    Ramrod88

    Ramrod88 4Runner on Corolla budget

    Joined:
    Dec 10, 2016
    Member:
    #3167
    Messages:
    207
    Gender:
    Male
    New Orleans
    Vehicle:
    22 TRD OFF ROAD
    what are the chances of this being a troll thread?
     
    Technologic80 likes this.
  16. Sep 5, 2023 at 1:10 PM
    #46
    Ramrod88

    Ramrod88 4Runner on Corolla budget

    Joined:
    Dec 10, 2016
    Member:
    #3167
    Messages:
    207
    Gender:
    Male
    New Orleans
    Vehicle:
    22 TRD OFF ROAD
    This guy is the assistant troll. Calling the honor marks "TAPE" What, are you looking through a used condom or something?
    the forum just got tag team trolled guys. We were long overdue
     
    Technologic80, mrmike7189 and MeefZah like this.
  17. Sep 5, 2023 at 1:36 PM
    #47
    5thToy

    5thToy New Member

    Joined:
    Nov 13, 2022
    Member:
    #29611
    Messages:
    525
    Gender:
    Male
    Northern Nevada
    Vehicle:
    2019 SR5P
    Strange thread of the year award.



    In the event the initial concern is serious, it's your rusty truck. Nobody swapped out the entire lower end of your 4Runner with someone else's rusty parts.
     
    Technologic80 and mrmike7189 like this.
  18. Sep 5, 2023 at 1:59 PM
    #48
    3JOH22A

    3JOH22A Toyota Gigolo

    Joined:
    Dec 31, 2022
    Member:
    #30349
    Messages:
    2,123
    Gender:
    Male
    District 6ix
    Vehicle:
    5G 4Runner, 3G Tacoma on 35"s
    Nothing to prove considering all the parts have similar amount of rust as your frame. The rust is from your own negligence.
     
    mrmike7189 likes this.
  19. Sep 5, 2023 at 2:33 PM
    #49
    LuLu

    LuLu New Member

    Joined:
    Mar 20, 2022
    Member:
    #26229
    Messages:
    640
    Gender:
    Male
    Utopia
    Vehicle:
    2022 TRD Sport
    OEM Crossbars OEM Hood Deflectors OEM Running Boards Tints
    Am just passing my own objective opinion, why not share something constructive rather that posting your fantasies.

    We have civil users on the forum.
    Sigmund Freud
     
  20. Sep 5, 2023 at 5:11 PM
    #50
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,583
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    In for the post professional auto inspector report.
     
  21. Sep 6, 2023 at 4:00 PM
    #51
    Ramrod88

    Ramrod88 4Runner on Corolla budget

    Joined:
    Dec 10, 2016
    Member:
    #3167
    Messages:
    207
    Gender:
    Male
    New Orleans
    Vehicle:
    22 TRD OFF ROAD
    That professional automotive inspector is one of very few people on the planet that can match the frame vin to the dash or doorjamb vin.
     
  22. Sep 6, 2023 at 4:08 PM
    #52
    Ramrod88

    Ramrod88 4Runner on Corolla budget

    Joined:
    Dec 10, 2016
    Member:
    #3167
    Messages:
    207
    Gender:
    Male
    New Orleans
    Vehicle:
    22 TRD OFF ROAD
    if you're gonna start a troll post, put more thought into it.This is amateur level stuff here. I'll never forget the one on bobistheoilguy a couple years ago. That goon was a pro.@BeachgirlTX
     
    Technologic80 likes this.
  23. Sep 7, 2023 at 8:36 AM
    #53
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,453
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @BeachgirlTX reading through this thread again, and having mixed thoughts on whether it's your own rust or whether you got taken to the cleaners - I really don't know now especially with those keys, waiting to hear back after you confirm #'s.
    Unfortunately you say you take care of your Runner, but I haven't seen evidence you have any photos from before at all, which makes me question that statement.
     
  24. Sep 7, 2023 at 3:52 PM
    #54
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,089
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    You realize the FCC ID is not unique to each 4R right?
     
    Technologic80 likes this.
  25. Sep 7, 2023 at 5:08 PM
    #55
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,453
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  26. Sep 7, 2023 at 5:10 PM
    #56
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,453
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    and the #'s I'm referring to are a slew of part numbers cited
     
  27. Sep 7, 2023 at 5:11 PM
    #57
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,453
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Could you imagine if A. this is a troll post, or B. she actually got over a 20-day period a bunch of s*** swapped out
     
    Technologic80 likes this.
  28. Sep 7, 2023 at 5:28 PM
    #58
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,089
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    I just read key fob thats why.

    I'm just staying in it for the "professional investigation".
     
  29. Sep 7, 2023 at 5:29 PM
    #59
    Ramrod88

    Ramrod88 4Runner on Corolla budget

    Joined:
    Dec 10, 2016
    Member:
    #3167
    Messages:
    207
    Gender:
    Male
    New Orleans
    Vehicle:
    22 TRD OFF ROAD
    its scenario A
     
  30. Sep 7, 2023 at 5:30 PM
    #60
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,453
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    farva_car_ramrod_meme_by_grantrules_dd3wfy8-fullview.jpg
     

Products Discussed in

To Top