1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Burning smell + steering vibration

Discussion in '3rd Gen 4Runners (1996-2002)' started by frankers, Jan 9, 2023.

  1. Jan 9, 2023 at 11:00 PM
    #1
    frankers

    frankers [OP] New Member

    Joined:
    Jan 9, 2023
    Member:
    #30549
    Messages:
    2
    Vehicle:
    1999 SR5 V6 4wd
    Hi everyone - relatively new to the forum and new to the 4Runner community. I’ve got a 99 SR5 v6 4wd with 230k miles on it. I’ve noticed recently that there is a pretty significant steering + body vibration after 40mph developing. After driving the rear driver side wheel area also smells burnt with noticeably more heat.

    Do you think it’s the brakes or calipers seizing? Could it be anything transmission related if the smell is coming from the rear? I checked the trans fluid and it looks pretty good. Engine also seems fine (oil + coolant ok, no visible leaks)
     
  2. Jan 10, 2023 at 9:22 AM
    #2
    steelevo

    steelevo Not so new anymore...

    Joined:
    Nov 29, 2022
    Member:
    #29845
    Messages:
    2,588
    Utah
    Vehicle:
    2023 4Runner TRD Pro Solar Octane
    Is it an oil burning smell or rubber burning smell?

    If rubber, check for frozen calipers, bad wheel bearing, or an alignment/suspension issue. There should be a few more knowledgeable people that will chime in with better ideas.
     
  3. Jan 10, 2023 at 5:55 PM
    #3
    Ahdofu

    Ahdofu New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    310
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    I am assuming you have already checked and this is not a wheel unbalance issue. If the rear driver side wheel area smells "burnt", then it could be the brake shoes (I am assuming that a 99 4Runner also uses rear brake drums and not disk brakes) or the wheel bearing. If you jack the car up, you can try to move the wheel from side to side or top to bottom. There should not be any movement. Also the wheel should turn relatively freely as well. Next you can remove the tire and the brake drum and check inside the drum to see the condition of the shoes, .., etc. Note that in removing the drum, you may need to turn the brake shoe adjuster screw.
     
  4. Jan 11, 2023 at 1:26 AM
    #4
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,338
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    Valve covers leaking onto exhaust? Leaky valve covers on the 3.4s is pretty common.
     
  5. Jan 11, 2023 at 6:17 PM
    #5
    frankers

    frankers [OP] New Member

    Joined:
    Jan 9, 2023
    Member:
    #30549
    Messages:
    2
    Vehicle:
    1999 SR5 V6 4wd
    Update: thanks everyone for the suggestions - it seems that the brakes were dragging from my previous brake job. Ended up with some warped drums and cracked shoes. Lesson learned, going to redo it which should hopefully resolve the vibration and burning smell.
     

Products Discussed in

To Top