2021 Leveled Sr5 premium with 1.25 wheel spacers

Good Morning all

This will be for my wife's 4Runner. She absolutely loves it. Keep in mind this change is for cosmetics only. She wants it to have a wider stance.
Installed the 2 inch leveling spacers in the front.
I was wanting to know if I will get tire rub doing this. A minor amount at full lock is not a big deal.
Having to cut the front bumper would be a bit much, but i am fully capable of doing it. I told her she may have to lose the mud flaps. She wasn't happy about that.

She is keeping stock wheels and tires. Any info in this would be appreciated prior to ordering the spacers.

Don

 

Its possible. Unless someone who has the exact same set-up as you can chime in, its all hearsay. I dont think it will be much of a problem if any. I did a 2" spacer on my Tundra a while back. No lift, stock wheels but 285/85 tires (stock is 275/70) and it rubs pretty good, but I dont care as its my 300k daily. Send it.

 

Thanks for the response.
I believe the rubbing may be negligible with the smaller tires. My F150 rubs with taller and wider tires, but only while locked and in reverse. It was so light I never did anything to prevent it.

I may order the spacers and see how it does. maybe someone else with a leveled, factory wheels and tires has more input.

Don

 

Here's my 2021 SR5 Premium with stock wheels and tires, but with 1.25" spacers installed. There is a very, very slight rub at full lock on the mud flaps - not enough to warrant doing anything about it. I should note that there will be a slight degradation of the ride - it will be slightly harsher. Said another way, you should be fine and your wife should be happy.

 

Do you have any photos from the front of the rig? I have a set of spidertrax sitting in the garage waiting to go on when I put the leveling kit on.

 

Yup.