How much poke -18 offset

Can you post some photos if you are running a -18 wheel offset.

 

I would like see also. But in 10 wide.

 

10 wide -18 offset... im guessing that would require a bit of chopping.

 

there are very few wheels out there with that offset (black rhino is the only company making them as far as I know?). width of wheel matters too when considering poke.... how wide is the wheel you are looking at? with an 9 or 9.5" wide -18 offset wheel you will almost certainly be trimming as well.

 

The tire will sit in the same place regardless of rim width.

Keep in mind that 10" wide wheels are too wide for most of the tire sizes used on 4Runners.

 

Yeah im looking at 17x9 -18 offset wheel.

 

Found this picture, claims to be 17x9 with -12mm offset on stock tire size with a 2” spacer lift upfront. Should give you a good idea, -6mm won’t make a huge difference.

 

This is 17X8.5 -12 offset
Backspacing: -12 is 4.28"

 

I thought this was interesting, don’t know anything about it but it looks pretty nice.

 

FWIW, I have

That looks a lot of negative offset. Maybe -30-40mm.

Kinda has that "bro" look.

 

SCS has them listed as -38 if they're Gen 5

https://www.stealthcustomseries.com/products/gen5?variant=39599717417013

 

This site should help. Just need to type in the specs.

 

It must be on wheel spacers because I have a different model of the SCS wheel but same specs and my tires don’t stick out anywhere near that far out, even with -38mm offset.

 

I’ve been looking at few 20X10 -18 and think of 285/55/20 or 295/55/20. Yes kinda the bro look but not that bad. There are a few choices out there. Got a wheel picked out. Thinking of really pulling the trigger and if it needs trimming or BMC then let it be .

 

The tires are 35/12.50 so maybe that is why.