2021 4 runner leveling/ lift kit

I just bought a 2021 4 runner SR5 premium and I want to raise the front in to match the back...I am probably going to do the spacers since mine is going to be for looks and not for off roading ...I am running the stock 17in Nitto tires ...will a 2 in level on the front make it level or do I need to raise the back up as well?? All suggestions will be appreciated thanks.

 

https://www.4runners.com/threads/leveling-front.6643/


https://trail4runner.com/2017/06/29/toytec-2-5-level-kit-5th-gen-4runner/


FYI, your tires and wheels are two separate pieces. You have stock 17 inch wheels. Not 17 inch nitto tires.

 

Completely understand that kind of irrelevant when coming to what I am asking for more worried about the lift than the tires ...thanks

 

There’s a new thread almost every week on leveling 4Runners. If you don’t know the difference between tires and wheels then I’d suggest you do some research before diving into lifts. Good luck.

 

Hey man i don’t know what your issue is but I know the different wheels and tires are maybe you mis understood my post I am running stock 265/70/17 tires and 17 in wheels I’m just wanting to know everyone’s opinion on leaving the front end or the front and rear to make it even and look better

 

I did a Cornfed lift up front to level out. Look up the Cornfed spacers on marketplace, Chris is a dealer for them and he is great with answering any questions you may have. I am very please with my lift btw.

 

So you did a 1.5 cornfed on the front ??? Any pictures ??

 

I have a Pro so I only needed 3/4” to level it out, and it won’t be the same as what you need, which is why I recommend asking @2016 4Runner SR5

 

I did a 3 inch front, 2 inch back spacer lift/leveling kit from Pro Comp. Nice and level and gave me room for bigger tires down the road. It’s been great so far.

 

For an SR5 the 1" front kit is what you need. Just sent you a PM Here are a few pictures of a 1" front only kit for reference. For anyone looking, I am a dealer for Cornfed Suspension. Please feel free to check out my thread and PM, call, text any time. All kits are in stock and ready to ship anywhere in the world

Cornfed Suspension Lift and leveling Kits | Toyota 4Runner Forum [4Runners.com]

 

I don't get it. My '16 Runner sits fine as is. Used to off-road a lot with my 1st gen Runner which had a definite sag in the rear.
I took care of that simply by re-arching my leaf springs. I am not a fan of a sagging vehicle, front or rear, but I have no problem with the stance of my stock 2016.

 

Front is an inch lower than the back. Bothers some, doesn't bother others. Personally I like some rake but the factory rake is too much for me. This is mine lifted 2.5" front 2" rear on 295s

 

Looks very nice! It also looks like you needed to do it to accommodate those tires.