1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Timing Belt V Serpentine Belt

Discussion in '3rd Gen 4Runners (1996-2002)' started by ipvmarp, Oct 5, 2020.

  1. Oct 5, 2020 at 12:13 PM
    #1
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None
    I called Toyota Certified shop today, asking for the quotes on changing the timing belt on 99 4Runner 4wd sr5 V6.

    They called me back saying that according to their database, this car has a timing chain. And what I would need yo replace is the Serpentine Belt and waterpump instead of the timing belt.

    Does that sounds correct?

    The comparison on the price :
    - Timing belt cost $2350,- for labor and parts
    - Serpentine cost $150,- + parts [ 300+waterpump , 80+ belt , Tension $?,- ]

    Any advice is much appreciated.

    This car has 182k odo and I dont know if they ever replace it.

    Thanks
     
    Thatbassguy likes this.
  2. Oct 5, 2020 at 4:25 PM
    #2
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,115
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    Thatbassguy likes this.
  3. Oct 5, 2020 at 4:42 PM
    #3
    jmkulbeth

    jmkulbeth Have you tried turning it off and on again?

    Joined:
    Sep 3, 2020
    Member:
    #16511
    Messages:
    103
    Gender:
    Male
    First Name:
    Jeffrey (KE5HDB)
    Siloam Springs, AR
    Vehicle:
    2020 4Runner Offroad Premium, Nautical Blue
    Bone stock!
    I'm brand new to 4Runners (2020 ORP)a and coming from a 2004 Jeep Wrangler Unlimited with 237000 miles on it, so I'll limit my input to general vehicle maintenance.

    First, if you have a loose/worn timing chain you'll generally know it by engine performance. I had an old (1989) Dodge truck that would not hold engine timing. It ran fine while accelerating, but when I reached speed and maintained it, the engine would buck and sputter. If I punched it, the chain took up slack and ran great. That's the symptom of a loose, old, stretched timing chain... Ok under load, not so good while trying to hold a speed. Of course, I'm assuming you have a timing chain and not a timing belt. Timing belts generally just fail, so keeping a service schedule on the timing belt is a good idea. Again, I don't know Toyota's that well yet, so someone else will need to speak up on timing belts.

    The serpentine belt you see on the front of the engine is a different animal. The serpentine takes power from the engine to drive other equipment, like the water pump, steering pump, alternator, and AC. It's the belt you see. If it breaks, you lose the use of that equipment under the hood, with the water pump being the one that will strand you from overheating. And the battery won't be charging with a broken belt, so you might get to your destination and have a dead battery.

    Nonetheless, is there a particular problem you're having? You can check the serpentine belt easily enough just looking at it. Google what to look for and you'll see pictures, which is better than writing it down here. I don't know the recommend schedule to change the serpentine belt, but they're pretty inexpensive and without the history it might be a good comfort to know you have a new one.

    I have a neighbor up the street that took her 4Runner in for service to a shade tree mechanic for an alternator job and they didn't seat the serpentine fully on the pulley. It shredded while she was driving, and messed up the power steering pump. I helped her replace the serpentine, so I do know it's something you can do if you're handy. YouTube has videos showing what to do. I found cussing helped significantly because there's not a lot of room to work in there.

    As for replacing the water pump and the serpentine at the same time... Unless the pump is leaking or performing poorly, I'd leave it alone and just mess with the serpentine.

    Those with more 4Runner experience can chime in and fill in the blanks and correct me. :)
     
  4. Oct 5, 2020 at 4:48 PM
    #4
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    You would normally replace the water pump along with the timing belt because you have to remove pretty much everything from the front of the motor to access them.

    A serpentine belt is a 5 minute job.

    Sounds like the service department was mistaken.

    I would get the timing belt replaced ASAP in case that is an interference motor (pistons would collide with valves if the belt broke).

    I would also shop around other reputable shops for a better price on the timing belt. It is a time consuming project, but it would suck to spend over $2k on a job that can be done for ~$300 in parts.
     
    jmkulbeth likes this.
  5. Oct 5, 2020 at 4:56 PM
    #5
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None
  6. Oct 5, 2020 at 5:01 PM
    #6
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None

    Yes, I am going to that toyota shop tomorrow to check on it, how come a toyota certified shop, is mistaken about the timing belt/chain and advising me to replace the Serpentine belt instead.

    Some other helpful topics in this forum mentioned that this V6 engine is non interference motor. Idk if that helps me to ease the worry , but I still need to change it ASAP
     
  7. Oct 5, 2020 at 5:05 PM
    #7
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    It will still leave you stranded if it breaks or slips. It just won't damage the internals of the engine. Let us know if you find a better deal. :)
     
  8. Oct 5, 2020 at 5:08 PM
    #8
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None
    Thanks for the loads of information thats very helpful.

    I maintained 70/80 easily on the highway without any issues. Accelerating is not a problem as well. But it is a belt not a chain, so I am assuming that I am on a very thin ice.
    Friend of mine told me to hear for a noisy sound as I am starting the engine, sometimes I can hear that screaming sound when I started the engine. Would that be the belt sound?

    In regard to the Serpentine, I will try to change it myself with the youtube guidance.
     
  9. Oct 5, 2020 at 5:13 PM
    #9
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Could be the serpentine belt. A timing belt has notches so it shouldn't slip. If it slipped, your 4runner would run like garbage.
     
  10. Oct 5, 2020 at 5:20 PM
    #10
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,115
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    $2000k sounds pretty damn high.

    But they already got the belt/chain wrong so I'd go elsewhere.
     
    ipvmarp[OP] and Thatbassguy like this.
  11. Oct 5, 2020 at 5:27 PM
    #11
    jmkulbeth

    jmkulbeth Have you tried turning it off and on again?

    Joined:
    Sep 3, 2020
    Member:
    #16511
    Messages:
    103
    Gender:
    Male
    First Name:
    Jeffrey (KE5HDB)
    Siloam Springs, AR
    Vehicle:
    2020 4Runner Offroad Premium, Nautical Blue
    Bone stock!
    You can rule out a squealing belt quickly. Grab a spray can of 'belt dressing' at the parts store, and the next time you hear that noise, squirt a little on the serpentine. If the squealing stops, it's likely your belt.
     
    Thatbassguy likes this.
  12. Oct 5, 2020 at 5:34 PM
    #12
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    ^^^^THIS^^^^

    Good point!
     
  13. Oct 5, 2020 at 5:58 PM
    #13
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None

    Exactly, I do really want to visit them tomorrow and see it myself what kind of Toyota Certified shop is this...LoL
     
    Thatbassguy[QUOTED] likes this.
  14. Oct 5, 2020 at 6:00 PM
    #14
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None
    I will, definitely.

    Loads of good info here for newcomer like me. thanks!
     
  15. Oct 5, 2020 at 6:04 PM
    #15
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    You're welcome! This forum is full of helpful people.

    Welcome to the forum!
     
  16. Oct 5, 2020 at 6:46 PM
    #16
    SR5 Limited

    SR5 Limited New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,594
    Vehicle:
    1996 SR5 Limited
    A little pricey for the timing belt but that must be for the tensioners too? Might want to replace the radiator and upper coolant hose while your at it?
     
    Thatbassguy likes this.
  17. Oct 6, 2020 at 12:13 AM
    #17
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,098
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    v6 4Runner in 99 had a 3400 engine.

    There is no serpentine belt. There is no timing chain.

    You have a Timing Belt and old-school drive belts for the engine accessories. (One each for AC, Power Steering, Alt)

    IT IS NOT AN INTERFERENCE ENGINE. The belt can go...and no damage to the pistons/valves/internals.

    Agreed on replacing the radiator. It is a $150 part from Advance for a lifetime warranty. My TOYOTA one only last 125k miles. Advance was no better and no worse. I'm on my 3rd radiator. If the tranny cooler in the radiator goes...you'll need a new transmission. Well worth the $150.

    Demand an Aisin water pump and Japanese parts. Mitsuboshi belts. Pulleys should be all OEM or OEM manufacturers. CHINESE CRAP built to "OEM SPECS" is a damn lie. The tensioner..unless it is leaking...I can't see it going bad. I replaced mine on the second t-belt replacement (3rd t-belt).

    I have done the t-belt on my 3400 twice. It's not that hard. You need to make a crank holder and the AC unit can be annoying to unbolt/bolt.

    While you're in there...there is more stuff that really should be done if it never has been:

    New water pump.
    New Radiator.
    New valve cover gaskets. It's not a whole lot more to take the intake manifold off at this point and with the front of the engine off, easier to get the valve covers off. These gaskets leak at 150k miles.
    New cam seals. (good to second t-belt change, 250k miles for me)
    New crank seal. (good to second t-belt change, 250k miles for me)

    Price wise...since this is like a 4 hour job. What's current top labor rate? $125? So like $500 labor? and that parts list they gave you is a mess but $600? So where is the other $1100?

    Maybe I need to quit my day job and install 3400 T-Belts.
     
    ipvmarp[OP] likes this.
  18. Oct 6, 2020 at 11:34 AM
    #18
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None
    20201006_142623.jpg


    Went to the place today, They are charging 150/hr for labor and these are the complete parts that they are recommending to replace for the job.

    TBelt
    2 Idlers
    Water Pump
    Drive Belts
    2 Seals

    Being in NYC, labor is pretty high I guess.

    I cancelled the job because the labor price is pretty high, they called back and gave me discounted price.
    lowered to 1400. for all the labors and parts.

    The reason I am cancelling is because the A/T 99 3400 V6 previous owner just told me that he just changed the Tbelt and Wpump, So with the new quotes, I am thinking to do the job on the M/T instead because this is mecessary for the M/T (Previous Owner told me)

    I told them, I am going to do the job but for a different vehicle which is the 97 M/T with 274k odo V6. 3400.

    Do I need to do the radiator aswell for the M/T?
     
  19. Oct 6, 2020 at 11:58 AM
    #19
    Kwikvette

    Kwikvette Kwik Fab

    Joined:
    Jun 25, 2020
    Member:
    #15120
    Messages:
    882
    Gender:
    Male
    559
    Vehicle:
    Multiple
    @ipvmarp

    First off, you've got a timing belt.

    Supply your own parts; there's a vendor that tons of people use on Ebay that offers a complete kit using Aisin parts.

    It'll run you about $250 give or take, and a weekend if you're doing it yourself for the first time.

    If you're not mechanically inclined, don't have the tools, space, etc. you should be able to get the job done for 400-600 in labor.

    Just look for an off road shop that specializes in Toyotas which by the way, you never mentioned where you're located.

    I bet even a member or two can help knock it out as a mod party.
     
    This site contains affiliate links for which the site may be compensated.
    #19
    ipvmarp[OP] likes this.
  20. Oct 6, 2020 at 12:36 PM
    #20
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,098
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    If you do get your own parts...check with the shop you want to go with. MOST shops no longer allow customers to bring parts.

    But those parts prices are insanely high. $180 for an $80 tensioner?

    Edit: read it wrong. $180 for the idler.
     
    Last edited: Oct 6, 2020
  21. Oct 6, 2020 at 1:31 PM
    #21
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None


    I live in NYC, probably thats why the prices are just insanely high, no space to do the proper job, even tho I am more than happy to get it done by myself.
    And I have never seen one good off road shop nearby, probably Long Island part or Upstate, need to do some research with that.



    I think for the tensioner cost $60++ as the pictures shown, that 180 is the idler.

    I checked out with 3 shops besides this toyota shop.

    1 of them charging 750++ for the T-belt only
    1 of them asking for 1000 with aftermarket parts (700 for labor only if I purchase the parts myself)

    Looking at the comments and replies, I think the price ranges should make sense for my zip code, considering the high taxes and labors here (unfortunately)
     
    This site contains affiliate links for which the site may be compensated.
    #21
  22. Nov 5, 2020 at 9:12 AM
    #22
    ipvmarp

    ipvmarp [OP] New Member

    Joined:
    Sep 13, 2020
    Member:
    #16696
    Messages:
    30
    Gender:
    Male
    Vehicle:
    1999 4Runner SR5 Gray
    None

    You were right, I found that this shop even tho its certified, it has terrible reputation. I will post the story here soon, because its such a long story.
     
    negusm and Thatbassguy like this.
  23. Nov 5, 2020 at 9:22 AM
    #23
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,670
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    :popcorn:
     
    negusm likes this.
  24. Nov 5, 2020 at 1:51 PM
    #24
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,098
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    We all like stories. Please share.
     
    Thatbassguy likes this.
  25. Nov 5, 2020 at 4:44 PM
    #25
    CowboyTaco

    CowboyTaco New Member

    Joined:
    Sep 11, 2020
    Member:
    #16657
    Messages:
    139
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2011 Tacoma DCSB

Products Discussed in

To Top