1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transmission Drain Plug Leak Solutions

Discussion in '3rd Gen 4Runners (1996-2002)' started by Babyroy, Sep 22, 2020.

  1. Sep 22, 2020 at 9:17 AM
    #1
    Babyroy

    Babyroy [OP] New Member

    Joined:
    Sep 22, 2020
    Member:
    #16891
    Messages:
    3
    Gender:
    Male
    First Name:
    Tim
    Vehicle:
    2000 Toyota 4Runner Sr5 4wd Azure Blue Pearl
    I accidentally overtightened the drain bolt on the transmission pan and now I have a really slow leak (just a bead of transmission fluid on the bolt no dripping or fluid on the ground that I have noticed). I figured since the 4runner has 210k miles and new transmission fluid I would just try to cover the leak and never change the fluid again. First I cleaned the bolt with brake cleaner, then I tried Permatex spray sealer and that didn't work. Then I tried more brake cleaner and JB weld but its still leaking. Have any of you have success stoping a leak with a different product? Should I just do more brake cleaner and JB weld? Or do I have to take the pan off without taking the drain bolt out, make a huge mess and replace the pan?IMG_4520.jpg
     
  2. Sep 22, 2020 at 12:57 PM
    #2
    negusm

    negusm New Member

    Joined:
    Oct 22, 2019
    Member:
    #11745
    Messages:
    2,095
    Gender:
    Male
    Vehicle:
    2002 4Runner SR5 4WD
    Transmission pan is kind of easy to remove. You can change the filter while you're in there as well as the pan.

    You stripped the pan and not the bolt, correct? Bolt won't come out?

    If it'll come out, You can probably use a magnetic plug like Jiffy Lube does when they destroy oil pans.
     
  3. Sep 22, 2020 at 1:20 PM
    #3
    4scooter19

    4scooter19 New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,338
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    I would pull the pan re tap it and get a new bolt. Did you use a new washer when you re installed the plug? You don't wanna re use the old one.
     

Products Discussed in

To Top