Question on spacers

I have a 2018 4Runner, stock tires, brought the front up level with 5100's set at 1.75 and now thinking about adding Spidertrax 1.25 spacers all around, this wouldn't add any rubbing issues would it? I believe it would only add clearance....I think.

 

it would push your wheels out of the fender by like 1/2 inch or so. I’ve been reading on these spacers and some people seem to be having issues with shaking at 50-60 mph. So make sure you install them correctly, cleaning, locktite, antiseize, torque time spec with torque wrench. Then balance and alignment.

 

With the stock wheels and tires you shouldn’t have any issues. If you do you may just slightly rub on the body mount when I’m reverse at full lock will be my guess. For your daily driver you should be good, just make sure you check them and torque them every 10,000 miles, or sooner for a peace of mind.