Replacement woofer on stock JBL in my gen4

I need to find a 2ohm 8" woofer for my 07 4runner w/ JBL factory stereo. Any good $50 woofers that work ?

 

Have you tried adding a 4 Ohm resistor to a 4 Ohm woofer?
Not sure which side , I'm thinking the positive side to make any 4 Ohm woofer into a 2 Ohm load.

 

https://www.youtube.com/watch?v=smw-6VRy5QY

 

Did a quick google search and chose this one was the cheapest. 2ohm must mean it’s a dual voice coil sub.

 

For $20 more there is a Kicker I like.

 

Link?

 

I just ordered this one a couple days ago. It’s supposed to be here tomorrow and I’ll let you know how it turns out.
https://www.skaraudio.com/products/...MIq6nc3YLl6wIVA4-GCh1krAQ-EAQYASABEgIM6fD_BwE

 

Little update on the skar audio speaker I posted. Honestly sounds fantastic, mainly for the $35 it was. I’ll do an install video or something here soon because I have to do it to my truck now too. Only difference from the normal removal of the back braces to add depth is I used the grill spacer as a speaker spacer so it is installed before the speaker instead of after.

 

Kicker has a 2ohm 8" shallow mount that fits perfectly in the OEM enclosure.

https://www.amazon.com/gp/product/B01BLVEXH2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

completely overlooked the $50 budget here...

 

I think I'll need to replace mine soon. Any idea the wattage the JBL system is putting out?

EDIT: Found it by searching TIS. The sub is 1.2 ohms and 65W.

 

@GalacticOwl Did you hook that 8" icker directly to the factory wires and amp? Or did you run a new bigger amp? Also, how does it sound compared to stock?

Mine just blew out last night and my goal was to replace it with a factory speaker... I am old and it is too loud... lol! But they do not seem to be readily available except for used or aftermarket Chinese.

Thank you for your help!

 

Yeah, it's just running off the factory amp. It defintely sounds better than the factory sub did but I wouldn't say it's any louder.

 

How did this turn out

 

Sorry, haven’t checked in in a while. That speaker worked well. You have to trim stuff in the back of the factory box due to the magnet being bigger but it wasn’t really all that hard. I did this in both my mothers 4runner and my own Although I am not using it anymore. I honestly couldn’t stand the factory amp stuff powering all of the truck. Sounded like garbage compared to a base aftermarket radio. So I rewired all my door speakers and put in an aftermarket head unit. I have to say, the factory jbl speakers sound amazing even compared to aftermarket speakers. Only running the 4 doors(6 speakers) at the moment but I am wired up for my sub. Just been lazy. If anyone is in Chattanooga area and wants that speaker for free just let me know
Edit: to add, just to inform. You do have to cut the factory wire harness where it connects to the speaker and put regular female speaker adapters on it.

 

Is it obvious which wires connect where? If not, can you provide a little help - newbie on wiring car speakers.

 

Page 2 gives the wire colors from the head unit to the speakers.

If you're asking about the literal connections in the car itself:
-all 4 door speakers are behind the door trim, youtube is your friend on how to remove
-the headunit you have to remove the center console and front HVAC trim panel to get behind, again youtube is your friend for videos

 

Sorry, I was not specific enough. When replacing the factory sub on the JBL Synthesis system, with no changes to anything else, how do you wire the new sub?

 

It depends on what the resistance of your new sub is. Click on the relevant resistance load link on this link in the middle of the page and a picture will pop up
https://www.crutchfield.com/S-kKHebPaVP0a/learn/wiring-subwoofers-ohms.html

Further info
https://www.crutchfield.com/learn/learningcenter/car/subwoofers_wiring.html

 

I just picked up a Rockford Fosgate 8" 2ohm shallow woofer. I'm assuming i'll have to cut off the OEM connector and like hard-wire the leads into the new sub? Anyone have some insight into that process?

 

How did that Rockford Fosgate sub workout with the stock amp? I'm deciding between the Fosgate and the Pioneer TS-A2000LD2.

 

Works fine, an upgrade from stock for sure but doesn’t thump with the stock amp powering it. I’m definitely happy with the purchase of the RF 8”.

 

Is the model number the Rockford Fosgate P3SD2-8? In a crutchfield review I read I'l have to modify the subenclosure to make this sub fit. did you encounter any issues with this sub in the stock sub enclosure?

 

I’ll try to find the P/N I purchased, for some reason I can’t find my email confirmation. I did have to modify the mounting holes, basically drill new holes and I had to modify the connector to get it work. All very easy to do. If you get a shallow mount subwoofer it’ll fit in the stock ‘box’ minus the new holes you have to drill for mounting it.

 

The install was easy and the sub sounds great. The Rockford Fosgate shallow 8" sub was definitely a great option for <$200 and I didn't have to replace the amp to push it.