What have you done to your 5th Gen 4Runner today?

I’m putting my mods together for my 2020 Pro. I’m going with the Cornfed spacer lift. I cannot justify taking off a brand new fox suspension and putting something else on. I rather do the spacer lift from Cornfed since the reviews are really good. I already got my SCS wheels going with 285’s when the lift is done. Got my raptor lights and planning on getting Cali led pods. Still trying to decide which way on the led bar since mine has this safety sense. I have a plan just cannot get any feed back on it.

 

[/QUOTE]

These look good. I thought about putting one on. Holding off till spring and plan on getting the front of my Pro clear wrapped. Because of chips you easily get with the Toyota paint. Might get the hole front end and front fenders done.

 

Contact 2016 4Runner SR5 on here. He is a Cornfed dealer and will set you up with what you need.

 

Must be aero dynamics of an SUV. Everyone I have had gets hood dings from road rocks. Never had an issue in trucks I've had.
Although I've had the deflector take a rock and deflect it right into the windshield before

 

Eibach is coming out with a replacement spring specifically for the PRO Fox suspension that will level it out.

 

Thanks yeah I have read up on it. But my opinion you are going to be waiting a while to get those springs. Also all the reviews you read on the Cornfed spacers I think is the better way to go now then when I get a decent amount of miles on my Pro then I will upgrade the suspension. All depends on your use of your 4runner. I do pretty much all highway miles and use it for the winter a lot. Not so much out 4wheeling.

 

I don't disagree with you about the cornfed spacers. I have a set waiting to go on while I am deciding about which direction to go with suspension.

 

Also it’s cheap to throw them on and take off if needed.

 

I blame Mississippi, lots of muddy roads and no one has mud flaps. Plus i don't think they know what "street sweepers" are.

 

Black valences on this weekend.
Next up is LFD crossbars and then the heritage pro grille.

Hopefully wheels and tires by mid summer.

 

Factory valances?

 

Yeah factory valences, for me it was just the path of least resistance, but many have had luck painting with various things

 

thanks! Nope, no paint, factory valences!

 

Such a great town you live in!

 

I got the rear from Mcgeorge and the front from conicelli out near conshohocken. Think front was like 170-ish and rear 144-ish. Bought ten new clips just in case.
I had a local body shop near my parents in north jersey put them on, just didn’t have time or space for a full bumper right now as I’m in a small parking spot without a garage.

Live full time in the greater philly area!

 

Or how close people drive to vehicles that typically toss rocks.

 

Yeah it's a nice little place!

 

welcome from philly!

 

how much are they?

 

Installed Apeman C770 dash front and rear.

I still need to watch a video on tucking the wires away into the headliner though.

Also still need to buy a hardwire kit so it can record a hit and run.

but pretty happy with it so far.

 

Some lil upgrades while waiting on the Borla exhaust and the carpets.

 

On the inlet

There is a restrictor on the inlet side of the air box. Knock that out for good measure. Not sure if it helps or not but the TRD intake doesn’t have it.

 

Not to be argumentative; but our TRD intake came with the "filter" after the filter. It was attached to the top section of the intake housing. I left ours in as nothing (intake wise) will truly increase HP alone!
It probably doesn't hurt to cut it out. I wouldn't expect anything different.
There are 1,000,000 opinions on the usefulness/ advantages of CAI alone!
Ryan

 

Installed my phone mount bracket in the 4Runner today. Doesn't block the clock/ Assessory Meter Display either. It's pretty solid too. Gonna install my cell on one side and a small tablet for GPS on the other side. The Blue Sea fast charging USB input was also added on the right.

 

The cali emissions carbon filter is not what I'm talking about. This bottle neck restrictor is what I am talking about.

 

I wouldn't mess with it , wont provide any benefit.

 

Got it..ill.look.into.it tomorrow, thanks

 

Have any proof of that? It’s a free mod that takes 30 seconds and opens up the inlet. TRD intake comes without it. There must be a reason for that.

 

You really think it would provide one iota of measurable improvement? I've got some oceanfront propery in Arizona to sell you.

 

Thanks, i just did..

And based on my previous experience with other intakes, yes, this will help. Not as much as a full intake but it will help the flow into the box.