What have you done to your 5th Gen 4Runner today?

Went in for an oil change and a brake check since the brakes had been grabbing at low speed. turns out my rear brakes were 90% worn YIKES. So they swapped out brakes and rotors, plus brake fluid flush. then they noticed some spring behind the hub was hitting the rotor? something along those lines. so its still there and hopefully will be done today. :/

 

DAAAAMMMMMNNNNNN!!!

 

Put new shoes on a couple weekends ago. The next day, I had a flashing TPMS light. Turns out you hafta be careful you don’t whack a sensor when you change tires. Tire shop fixed it up last weekend and all is right with the world.

 

A little review :
I’m not to wild about the TPMS that I installed. They work fine except for the fact that you can’t change the tire temp to F from C.
The remote start was a easy 30 min job at most and works great. I wish I did it first bought my ride.

 

Full frontal view.

 

Looks good! Definitely way different than anything on the market.

 

That's what we try to do with the angles and all that. There are already a ton of "square" and huge bulky bumpers on the market.

 

@Trident904 I may have some good news this evening or anyone else that likes the looks or would be interested in our hybrid offering.

 

Any lift?

 

Tinted all (Minus windshield) windows 18%

 

No its stock

 

damn looks great! #Goals

 

Need the profile picture if you can. Will there be any brackets for pod fog lights?

 

See our black Friday sale thread. The fog brackets are included in the base price. You want a side profile?

 

I wish something like this would be made without having to cut the bumper and deleting factory fog lights.

 

Here are a couple more different views. Will have more pictures once we get them after painting.

 

Probably won't happen unless you make something huge and heavy. It'll also IMO look bulky and not as good. There is some bumper manufacturer that makes a plate bumper like that I still think you have to trim the grill. IMO it just looks too big and bulky on these trucks.

 

My thinking is a "slim line/winch bumper" with the added push bars. From your pics and a few others it looks close. To me the 5th gens just looked hacked and unfinished with the cuts under the headlights, but that just me i guess.

 

Full plate???? It covers up the stuff behind the bumper

 

Hard to see exactly from this pic, but it's the best I could find.

I like this bumper style a lot because of how clean it is. Kind of that winch bumper thing with a skid plate sloping down and back without any kinks.

 

Streamline with hoop???

 

Is that your Streamline? On your site what is meant by Line-x? Thanks

 

Line-x like the truck bed coating. We offer that for some of the products.

Yes that is our streamline. The one pictured is in aluminum and a custom powder coat color. This is out shop T4r.

 

Something like this for the "Base", but with the added brush guard to cover to the corners. Leaving the factory fog lights. So the only cutting would be the center section. Never seen it done. One day i will mock it up, if i ever find the time.

 

What rear ome springs would match up well with 887s up front

 

So like that but with some tubes wrapping around the outside of the bumper? Am I understanding that right?

 

Dealer called. They needed the steps on my 19 so ordered a new set for the new one. Said they would put them on now. Said thanks but not a chance, I barely trust the day guys, no way is the night guy touching my runner

 

Are you guys running any specials right now or in the near future.

 

Tagged you in our sale thread. Keep an eye on our vendor area we run specials throughout the year.

 

Built a rear deck with storage space underneath and a slide out table/counter. Will be adding the rest of the platform soon so I can sleep on it.