What have you done to your 5th Gen 4Runner today?

Thanks!
TACOVRD on TW?

 

At The Helm / ATH Fab
I made it.

 

Nice. You don’t sell them huh?

 

Yes sir!

 

Hey Guys, first post.
Today I sprayed my Off Road silver valences with black bedliner. Spent a couple hours masking and another couple spraying the coats. All in all came out great considering it was under $20 and it looks like it came stock this way. Hopefully it holds up.

Thx



Btw I chose this Rusto Bedliner Pro because it has a matte finish that isn't goopy and popcorn-finished like line x, rhino, herculiner (and even the non-pro rustoleum). I was nervous about most Bedliner looking cheap, but after I found this YouTube video https://youtu.be/eL2kkj9YBjk and saw this particlur finish, and how little bleeding there was I decided to go for it...

 

Finally installed the SSO rack!




Now for the Yakama rack system to carry my kayak.

Project list:
*Tint windows: Wednesday
*Install folding mirrors: next weekend ?
(And since the door panel will be off for the mirrors, upgrade the door speakers and dash speakers!)

*Plastidip valances
Rock Sliders/running boards: ?
*Blacked out tail lights: Christmas
*New license plate holder that can withstand the car wash.

 

Cool! Looks good. I’m going with plastidip. I’m worried and just need to do it! You’d looks great.

 

Thanks! But I have to say, plastidip will not be good for this. I went the plastidip route for my badges, and they turned out passable, but i would say go my route for the valence. Seriously it was so easy to spray once I had it all set up. Plastidip is suuuper clumpy and the spray is spotty, no way it would have worked for this. Get the Rusto pro it just sprays out so much better and evenly, it's night and day from Plastidip. Truuust me. But make sure to get the giant pro bottle like in my pic. I did my research so you don't have to! Also while you're at home Depot get the plastic drop clothes like I did, they are $1.50 each. Scratch the surface of the valence with some sand paper or the rough side of a sponge beforehand, then wash it down, make sure it's super clean. Let it dry then take your time masking it (most important part) and you won't regret it!

Also after you've done 4 coats with 20 minutes in between, and let it dry for an hour, but before you pull off the tape, take a razor or exacto and trace the edge where you want the paint to peel away, otherwise when you pull off the tape it will snag and mess up your edge and possibly run the whole thing. Go slow.

 

No, this particular one is just for me

It might be a possibility in the future though.

 

Ya. I did a lot of “research” and decided Pd was the way to go. I have the paint already. If I can do it soon we could do a comparison over time. Everything gets better and that liner looks great.

 

Haha "alright", go for it! Hope it looks better than mine, but at least take me up on the plastic drop clothes!

 

Plastidip can look & perform great if applied correctly...
I have many hours & projects with it.
YouTube Dipyourcar or DYC & learn.
Many light coats...
No hate. Just stating.
Best of luck to you both!

 

For sure, and thanks to everyone here, I never would have thought you could do this stuff yourself if it weren't for the awesome info on all these forums!

 

Used it to pick up a new ride...

 

Sorry but Plastidip SUCKS!!

 

Please, do expand...
I know it has its uses & limits.
But sucks; I don't think that is true or fair.
It is owned by permatex. Pretty sure they know what they are doing...
It is not linex or bed liner.
It is a pealable & non to semi permanent solution.

 

Sorry brother, I'm being facetious. IMO, if you are not going to do it permanently, why do it? Also, a lot of people in our world go for image...it's all about how things look. Understand? For example...the PRO

 

Agreed.
1. Plastidip is as permanent or temporary. If it is for badges; I've had them last years (until the vehicle was sold).
This is also good to try & test color combinations before committing to a permanent option.
2. It is all about "personal" image, not bling (with our crowd). Therefore plastidip is perfect for finding your accent color or deciding weather to remove the badges.
Plastidip will always hold a place on our shelf as we got the turbine sprayer & the lot.
It is great stuff when used right.
I know you were rattling me back there! It is all good.
I know the abilities of that product & given the chance I could reproduce a niteshade edition for pennies of MSRP...

 

Instead of the plasti dip try this stuff https://getsuperwrap.com/ it works great...

 

3" OME lift kit
LT285/70R17 BFG KO2

 

Check out Rust-Oleum peel coat. I've used it and Plasti-Dip both and I like it better. It's easier to spray but is thinner. I used it on the wheels on my excursion about 2 years ago and it has held up fine.

 

Think it would hold up in a car wash? Thanks

 

LFD roof rack installed.
3/4 length, steel.
.
http://www.lfdoffroad.com/catalog
.

 

Got a new wire harness for ARB compressor. Got it installed this weekend along with the anytime camera and change the clock of the 2019 with the information/clock cluster of the 2013.

 

From the videos you have to take off the bumper to get the valence off.

 

...Preview of what’s next

 

I think it would. I use the self service car wash regularly to wash my rig and power wash the wheels and it has held up fine.

 

Plastidip will hold up to a car wash if done correctly. Done it tons of times.
Not a direct hit from a pressure washer. It is to strong and will strip or tear it. Done that also.
I have plastidipped a lot of things...
Sorry I missed the earlier post. Yesterday was crazy.
My pressure washer is commercial grade & very strong.

 

I guess I used the term "pressure washer" loosely. The self serve car wash I use definately has more pressure than any hose or nozzle I could get at home but not the pressure of an actual pressure washer. I agree I wouldn't trust it to hold up to an actual pressure washer. Definitely trust it through the car wash though.

 

Installed the Precision LED interior kit. Night and "Day" difference... Eh, eh, (Sorry, been working on dad jokes, haha). I am impressed with this kit so far. I included some pics for comparison. I contacted them and they had a coupon code "pledforum15" (15% off)
Before:


During:

After: